yellow munson
02-17-2009, 03:59 PM
we have full line of FIC injector. including new blue-max series injector.
we also offer high impedance injector which means no more resister box. we carry up to 1000cc inejctor. these injector can handle extream pressure 100 psi base pressure(static fuel pressure).
* High Impedance, no need for injector drivers or injector resistors
* High pressure capability, All injectors will run comfortably at 100psi above 10v, flow will be increased by approximately 50% at 100psi
* High duty cycle, with a recovery time of only 1ms, all injectors will run up to 92.5% duty cycle at 9k rpm and 95% duty cycle at 6k rpm while maintaining linearity within 1%
* Excellent low pulsewidth response, linearity within 2% all the way down to 2ms, predictable response down to 1.5ms. Using a 3 dimensional battery comp table with Motec V3 software, low pulsewidth response can be linearized to practically zero flow.
* Good atomization, Droplet size of the 1000cc injector is comparable to the Siemens Mototron 60lb injector, and is far better than the Multec 95lb, Standard Motor Products (RC) 1000cc and Siemens 72 and 83lb injectors.
* Excellent consistency, no sets will require more than a 1% trim
* Ruler flat response, unmatched linearity means easy tuning and accurate compensations.
blue max injector
they are available in different size.
1850cc
1750cc
1650cc
1550cc
1450cc
1350cc
1250cc
call or email me for more price. we can provide pretty good price for all of injector line ups.
ex:
blue max 1850cc are $475 for 4
blue max 1650cc are $465 for 4
high impedance 1000cc inejctors are $435 for 4 injectors. call me or email me for specific car and engine so we can get you what you need to bolt-on set up.
other size of injector need, please email me at t88hlexus@Hotmail.com
we also offer high impedance injector which means no more resister box. we carry up to 1000cc inejctor. these injector can handle extream pressure 100 psi base pressure(static fuel pressure).
* High Impedance, no need for injector drivers or injector resistors
* High pressure capability, All injectors will run comfortably at 100psi above 10v, flow will be increased by approximately 50% at 100psi
* High duty cycle, with a recovery time of only 1ms, all injectors will run up to 92.5% duty cycle at 9k rpm and 95% duty cycle at 6k rpm while maintaining linearity within 1%
* Excellent low pulsewidth response, linearity within 2% all the way down to 2ms, predictable response down to 1.5ms. Using a 3 dimensional battery comp table with Motec V3 software, low pulsewidth response can be linearized to practically zero flow.
* Good atomization, Droplet size of the 1000cc injector is comparable to the Siemens Mototron 60lb injector, and is far better than the Multec 95lb, Standard Motor Products (RC) 1000cc and Siemens 72 and 83lb injectors.
* Excellent consistency, no sets will require more than a 1% trim
* Ruler flat response, unmatched linearity means easy tuning and accurate compensations.
blue max injector
they are available in different size.
1850cc
1750cc
1650cc
1550cc
1450cc
1350cc
1250cc
call or email me for more price. we can provide pretty good price for all of injector line ups.
ex:
blue max 1850cc are $475 for 4
blue max 1650cc are $465 for 4
high impedance 1000cc inejctors are $435 for 4 injectors. call me or email me for specific car and engine so we can get you what you need to bolt-on set up.
other size of injector need, please email me at t88hlexus@Hotmail.com